{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 3mm
Article no.: 164180 3
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 2.810 mm - 3.350 mm | |
| Flute length Lc | 15 mm | |
| Overhang L1 | 42 mm | |
| Overall length L | 114.5 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.08 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X; ZC; Z; ZA | |
| Configurable qualities | 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 3 | |
| EAN / GTIN | 4062406264178 | |
| Manufacturer number | 164180 3 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 3mm |
||||
| Overhang L1 | 42 mm | 33 mm | 30 mm | 29 mm |
| Coating | uncoated | uncoated | uncoated | uncoated |
| Overall length L | 114.5 mm | 61 mm | 61 mm | 61 mm |
| Nominal ⌀ DC | 3 mm | 3 mm | 3 mm | 3 mm |
| Flute length Lc | 15 mm | 15 mm | 15 mm | 15 mm |
| Application for type of drilling | for through hole | for through holes | for through holes | for through holes |
| Feed f in steel < 750 N/mm2 | 0.08 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. |