{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel HM-borr cylindriskt skaft DIN 6535 HA, TiAlN, ⌀ DC h7 (mm resp. tum): 18,8
Article no.: 122504 18,8
Artikkelkode:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Skärmaterial: VHM
- Standard: DIN 6537 K
- Utförande: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Produktinformasjon
Technical Data
| Serie | Pro Steel | |
| Nominal ⌀ DC | 18.8 mm | |
| Beläggning | TiAlN | |
| Skärmaterial | VHM | |
| Standard | DIN 6537 K | |
| Utförande | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Spetsvinkel | 140 grad | |
| recommended maximum drilling depth L2 | 50.8 mm | |
| Skaft | DIN 6535 HA med h6 | |
| Invändig | ja, med 25 bar | |
| Bearbetningsstrategi | HPC | |
| Semi Standard | ja | |
| Flute length Lc | 79 mm | |
| Overall length L | 131 mm | |
| Shank ⌀ Ds | 20 mm | |
| Feed f in steel < 900 N/mm2 | 0.28 mm/rev. | |
| Färgring | grön | |
| Produktslag | Spiralborr |
Identification numbers & Classifications
| Artikkelkode | 122504 18,8 | |
| EAN / GTIN | 4045197826824 | |
| Manufacturer number | 122504 18,8 |
Användningstabell
N
250
N
200
N
160
P
125
P
115
P
95
P
90
P
65
M
35
M
30
K
100
K
65
Beskrivelse
Version:
Straight major cutting edges and a special flute profile ensure good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||
|---|---|---|---|---|---|---|---|---|
|
HOLEX Pro Steel HM-borr cylindriskt skaft DIN 6535 HA, TiAlN, ⌀ DC h7 (mm resp. tum): 18,8
on request
På lager
10 styck i lager
NOK 2 983,72
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
51 styck i lager
115,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
11 styck i lager
292,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
3 styck i lager
467,46 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
3 styck i lager
467,46 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
21 styck i lager
165,36 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
21 styck i lager
165,36 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
10 styck i lager
234,26 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Utförande | 4×D | 4×D | 4×D | 4×D | 4×D | 4×D | 4×D | 4×D |
| Skaft | DIN 6535 HA med h6 | DIN 6535 HA s h6 | DIN 6535 HA s h6 | DIN 6535 HA s h6 | DIN 6535 HB s h6 | DIN 6535 HA s h6 | DIN 6535 HE s h6 | DIN 6535 HE s h6 |
| Skärmaterial | VHM | VHM | VHM | VHM | VHM | VHM | VHM | VHM |
| Flute length Lc | 79 mm | 65 mm | 79 mm | 79 mm | 79 mm | 79 mm | 79 mm | 79 mm |
| Shank ⌀ Ds | 20 mm | 16 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Produktslag | Spiralborr | Spiralno svrdlo | Spiralno svrdlo | Spiralno svrdlo | Spiralno svrdlo | Spiralno svrdlo | Spiralno svrdlo | Spiralno svrdlo |