{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
⌀ exterior | 12,4 mm | |
Strat de acoperire | TiAlN | |
Unghi la vârf teşitor | 90 grad | |
Materialul sculei | HSS | |
Diviziunea tăişului lamatorului | inegal | |
Număr de dinţi Z | 3 | |
Norm | DIN 335 C | |
Coadă tip | Coadă cu trei suprafeţe de prindere | |
Răcire interioară | nu | |
cel mai mic ⌀ de teşitor pentru gaură de la | 2,8 mm | |
Lungimea totală L | 56 mm | |
⌀ cozii Ds | 8 mm | |
Pentru şuruburi cu cap înecat DIN 7991 | M6 | |
Avans f pentru oţel < 500 N/mm2 | 0,12 mm/rot | |
Toleranţa arborelui | h9 | |
Inel colorat | verde | |
Serie | Pro Steel | |
Tip produs | Adâncitor în trepte şi adâncitor conic |
Cod articol | 150184 12,4 | |
EAN / GTIN | 4062406524432 | |
Număr producător | 150184 12,4 |
Acest articol |
Recomandări |
||||
---|---|---|---|---|---|
HOLEX Pro Steel Teşitor de precizie cu divizare inegală şi cu 3 suprafeţe de prindere 90° 12,4 mm
La cerere
În stoc
659 livrabil imediat
21,94 €
plus TVA,
plus cost livrare
|
|||||
Coating | TiAlN | uncoated | TiAlN | TiAlN | AlTiCN |
Colour ring | verde | without | green | green | blue |
Countersink tip angle | 90 | 90 | 90 | 90 | 90 |
Norm | DIN 335 C | DIN 335 C | DIN 335 C | Manufacturer’s standard | DIN 335 C |
Shank | Coadă cu trei suprafeţe de prindere | Shank with h9 and three drive flats | Shank with h9 and three drive flats | Three clamping flats to h9 | Shank with h9 and three drive flats |
Shank tolerance | h9 | h9 | h9 | h9 | h9 |
smallest countersink ⌀ for holes from | 2,8 | 2.8 | 2.8 | 2.8 | 2.8 |