{{ name }}
Č. pol. {{ combinedCodeWithHighlight }}
Kód položky:
EAN/GTIN:
Číslo výrobcu:
NC výstružník H7 17
Č. pol.: 162900 17
Kód položky:
- Tolerance: H7
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
Podrobnosti o výrobku
Technické údaje
| Nominal ⌀ DC | 17 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 54 mm | |
| Overhang L1 | 128 mm | |
| Overall length L | 175 mm | |
| Number of cutting edges Z | 8 | |
| Shank ⌀ Ds | 14 mm | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.3 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Type of product | Phillips bit |
Identifikačné čísla a klasifikácie
| Číslo položky | 162900 17 | |
| EAN/GTIN | 4045197091000 | |
| Číslo výrobcu | 162900 17 |
užívateľská tabuľka
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Popis
Version:
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. For highest concentricity and process reliability. No need to order special collets.
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7 both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7 both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
Note:
Súbory na stiahnutie a dokumenty
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
NC výstružník H7 17
na vyžiadanie
Dodanie ihneď
42 kus/y s okamžitým dodaním
57,75 €
plus DPH
plus náklady na dopravu
|
na vyžiadanie
Dodanie za 1 – 2 týždňov
0 kus/y s okamžitým dodaním
130,52 €
plus DPH
plus náklady na dopravu
|
||||
| Coating | uncoated | uncoated | bez povlaku | bez povlaku | bez povlaku |
| Colour ring | green | without | bez | bez | bez |
| Overall length L | 175 mm | 175 mm | 175 mm | 214 mm | 214 mm |
| Nominal ⌀ DC | 17 mm | 17 mm | 17 mm | 17 mm | 17 mm |
| Shank | DIN 1835 A to h6 | DIN 1835 A to h6 | Valcová stopka s h9 | Morse kužeľ | Morse kužeľ |
| Tool material | HSS E | HSS E | HSS E | HSS E | HSS E |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | 0,3 mm/ot. | 0,3 mm/ot. | 0,2 mm/ot. | 0,2 mm/ot. |