{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Drill indexable drill Combination shank 26,5 mm
Article no.: 235000 26,5
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HOLEX Pro | |
| Nominal ⌀ D | 26.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 55 mm | |
| Overhang LA | 77 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 0.3 mm | |
| ISO code indexable insert | SOMT093608 / XOMT093605 | |
| Pack of insert screws | 232980 4 (TX9;1.2Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 137 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235000 26,5 | |
| EAN / GTIN | 4062406252885 | |
| Manufacturer number | 235000 26,5 |
Description
Version:
HOLEX Pro Drill indexable drills combine cost efficiency with technically fully developed capability.
For use up to 4×D in challenging drilling applications.
Bore tolerance: -0.1 / +0.25 mm
For use up to 4×D in challenging drilling applications.
Bore tolerance: -0.1 / +0.25 mm
Application:
With indexable inserts No. 235030 – 235082.
Both SOMT inserts for the outer insert seat and also XOMT inserts for the inner insert seat are required.
Both SOMT inserts for the outer insert seat and also XOMT inserts for the inner insert seat are required.
Supplied with:
With insert screws (supplied without indexable inserts).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HOLEX Pro Drill indexable drill Combination shank 26,5 mm |
|||
| Number of cutting edges Z | 1 | 1 | 1 |
| Nominal ⌀ D | 26.5 | 26.5 | 26.5 |
| Shank ⌀ Ds | 32 mm | 32 mm | 32 mm |
| Shank length Ls | 60 mm | 60 mm | 60 mm |
| Pack of insert screws | 232980 4 (TX9;1.2Nm) | 239700 8IP (1.3 Nm) | 239700 8IP (1.3 Nm) |
| Reach L1 | 55 mm | 54 mm | 54 mm |
| Type of product | Indexable drill | Indexable drill | Indexable drill |