GARANT Master Steel solid carbide roughing end mill HPC 3 mm

Article no.: 203035 3

⌀ f8 D_C (mm):

Quantity

Product details

Serie		Master Steel
Cutting edge ⌀ D_C		3 mm
Coating		TiAlN
Tool material		Solid carbide
Norm		DIN 6527
Type		N
Tolerance nominal ⌀		f8
No. of teeth Z		4
Helix angle		38 degrees
Helix angle characteristic		unequal spacing
Spacing of the cutters		unequal spacing
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.3×D for side milling
Shank		DIN 6535 HB to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		8 mm
Overall length L		57 mm
Shank ⌀ D_s		6 mm
Corner chamfer width at 45°		0.06 mm
Corner chamfer angle		45 degrees
Feed f_z for slot milling in steel < 900 N/mm²		0.02 mm
Feed f_z for side milling in steel < 900 N/mm²		0.025 mm
Colour ring		green
Type of product		End / face mill

260

240

190

180

150

250

For roughing and finishing.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.

Optimised flute form, eccentric relief ground, wide chip space.

	This article	Recommendations
	GARANT Master Steel solid carbide roughing end mill HPC 3 mm	Solid carbide milling cutter MTC 3 mm	Solid carbide roughing end mill HPC 3 mm	Solid carbide roughing end mill HPC 3 mm	Solid carbide milling cutter MTC 3 mm
Colour ring	green	green	green	green	green
Through-coolant	no	no	no	no	no
Shank	DIN 6535 HB to h6	DIN 6535 HB to h6	DIN 6535 HB to h6	DIN 6535 HB to h6	DIN 6535 HB to h6
Helix angle	38	45	38	38	45
Corner chamfer width at 45°	0.06	0.1	0.06	0.1	0.1
Shank ⌀ D_s	6	6	6	6	6
Type of product	End / face mill	End / face mill	End / face mill	End / face mill	End / face mill