{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DOVEIQMILL face mill 80/6 mm
Article no.: 222500 80/6
Article code:
New product
- Number of cutting edges Z: 6
- Setting angle κ: 50
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Serie | DOVEIQMILL | |
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 50 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4.6 mm | |
| maximum external ⌀ Dmax | 89.4 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| suitable indexable insert | SYHU0704.. | |
| Manufacturer's designation | IQ845 FSY D080-06-27-R07 | |
| Type of product | Face Mill |
Identification numbers & Classifications
| Article number | 222500 80/6 | |
| EAN / GTIN | 7291075311396 | |
| Manufacturer number | 3106526 |
Description
Version:
Extremely stable face milling system. The indexable inserts are fixed by means of screw clamping and by additional fixing in a dovetail-like insert seating. The positive axial installation position of the plates results in a very soft cut and thus guarantees the best surface qualities. Maximum cost-effectiveness due to 8-cutter indexable inserts.
Spare part:
Pack of insert screws No. 229695 4 (IP15; 4.8 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
DOVEIQMILL face mill 80/6 mm
on request
In stock
9 pieces in stock
€647.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€481.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€479.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
€477.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
€450.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 6 | 6 | 6 | 6 |
| Overall length Ltot | 50 | 50 | 50 | 50 | 50 |
| Through-coolant | yes | yes | yes | yes | yes |
| maximum external ⌀ Dmax | 89.4 | 93 | 93 | 89 | 92.1 |
| Shank type | with bore | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 80 | 80 | 80 | 80 | 80 |
| Type of product | Face Mill | Face mill | Face mill | Face mill | Face mill |