{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DOVEIQMILL face mill 63/5 mm
Article no.: 222500 63/5
Article code:
New product
- Number of cutting edges Z: 5
- Setting angle κ: 50
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Serie | DOVEIQMILL | |
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 50 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4.6 mm | |
| maximum external ⌀ Dmax | 72.4 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SYHU0704.. | |
| Manufacturer's designation | IQ845 FSY D063-05-22-R07 | |
| Type of product | Face Mill |
Identification numbers & Classifications
| Article number | 222500 63/5 | |
| EAN / GTIN | 7291075311372 | |
| Manufacturer number | 3106524 |
Description
Version:
Extremely stable face milling system. The indexable inserts are fixed by means of screw clamping and by additional fixing in a dovetail-like insert seating. The positive axial installation position of the plates results in a very soft cut and thus guarantees the best surface qualities. Maximum cost-effectiveness due to 8-cutter indexable inserts.
Spare part:
Pack of insert screws No. 229695 4 (IP15; 4.8 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
DOVEIQMILL face mill 63/5 mm
on request
In stock
8 pieces in stock
€602.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€548.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€458.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
43 pieces in stock
€417.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
31 pieces in stock
€414.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€254.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 5 | 5 | 5 | 5 | 5 |
| Mounting bore ⌀ | 22 | 22 | 22 | 27 | 22 | 22 |
| suitable indexable insert | SYHU0704.. | SN.U ;ON.U | SE.. 1203.. | POMX 10T5.. | OF.. 050405 | SE.. 1204.. |
| Shank type | with bore | with bore | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 63 | 63 | 63 | 63 | 63 | 63 |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |
| Type of product | Face Mill | Face mill | Face mill | Face mill | Face mill | Face Mill |