{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DOVEIQMILL face mill 100/10 mm
Article no.: 222500 100/10
Article code:
New product
- Number of cutting edges Z: 10
- Setting angle κ: 50
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Serie | DOVEIQMILL | |
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 10 | |
| Shank type | with bore | |
| Setting angle κ | 50 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4.6 mm | |
| maximum external ⌀ Dmax | 109.4 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| suitable indexable insert | SYHU0704.. | |
| Manufacturer's designation | IQ845 FSY D100-10-32-R07 | |
| Type of product | Face Mill |
Identification numbers & Classifications
| Article number | 222500 100/10 | |
| EAN / GTIN | 7291075311426 | |
| Manufacturer number | 3106529 |
Description
Version:
Extremely stable face milling system. The indexable inserts are fixed by means of screw clamping and by additional fixing in a dovetail-like insert seating. The positive axial installation position of the plates results in a very soft cut and thus guarantees the best surface qualities. Maximum cost-effectiveness due to 8-cutter indexable inserts.
Spare part:
Pack of insert screws No. 229695 4 (IP15; 4.8 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
DOVEIQMILL face mill 100/10 mm
on request
In stock
3 pieces in stock
1 030,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
938,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
657,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 10 |
| Mounting bore ⌀ | 32 | 32 | 32 |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | SYHU0704.. | SN.U ;ON.U | SE.T1305 ;XEEW1305 |
| Shank type | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 100 | 100 | 100 |
| Type of product | Face Mill | Face mill | Face mill |