{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DOVEIQMILL face mill 50/4 mm
Article no.: 222500 50/4
Article code:
New product
- Number of cutting edges Z: 4
- Setting angle κ: 50
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Serie | DOVEIQMILL | |
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Setting angle κ | 50 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4.6 mm | |
| maximum external ⌀ Dmax | 59.4 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SYHU0704.. | |
| Manufacturer's designation | IQ845 FSY D050-04-22-R07 | |
| Type of product | Face Mill |
Identification numbers & Classifications
| Article number | 222500 50/4 | |
| EAN / GTIN | 7291075311358 | |
| Manufacturer number | 3106522 |
Description
Version:
Extremely stable face milling system. The indexable inserts are fixed by means of screw clamping and by additional fixing in a dovetail-like insert seating. The positive axial installation position of the plates results in a very soft cut and thus guarantees the best surface qualities. Maximum cost-effectiveness due to 8-cutter indexable inserts.
Spare part:
Pack of insert screws No. 229695 4 (IP15; 4.8 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
DOVEIQMILL face mill 50/4 mm
on request
In stock
7 pieces in stock
490,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
387,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
347,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
26 pieces in stock
350,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
26 pieces in stock
327,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 4 | 4 | 4 | 4 | 4 |
| Mounting bore ⌀ | 22 | 22 | 22 | 22 | 22 |
| Overall length Ltot | 40 | 40 | 40 | 40 | 40 |
| suitable indexable insert | SYHU0704.. | POMX 10T5.. | OF.. 050405 | SE.. 1204.. | SE.T1305 ;XEEW1305 |
| Shank type | with bore | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 50 | 50 | 50 | 50 | 50 |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |