{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 9.7 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 22 mm | |
Overhang length L1 incl. recess | 30 mm | |
Recess ⌀ D1 | 9.5 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.09 mm | |
Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202002 9,7 | |
EAN / GTIN | 4062406125783 | |
Manufacturer number | 202002 9,7 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 9,7mm
on request
In stock
7 pieces in stock
£68.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£26.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
£34.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
92 pieces in stock
£29.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
49 pieces in stock
£22.90
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | TiAlN | AlCrN | AlCrN | uncoated |
Colour ring | yellow | without | without | without | without |
Overall length L | 72 mm | 48 mm | 72 mm | 55 mm | 55 mm |
Through-coolant | no | no | no | no | no |
Flute length Lc | 22 mm | 11 mm | 22 mm | 11 mm | 11 mm |
Helix angle | 42 degrees | 30 degrees | 30 degrees | 45 degrees | 45 degrees |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |