{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
HiPer-Drill base body 13 mm
Número de artículo: 231605 13
Código del artículo:
- Version: 3×D
- Shank: ISO 9766
- Use for drilling: limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
- Number of cutting edges Z: 2
- Through-coolant: yes
Detalles de producto
Datos técnicos
| Series | HiPer-Drill | |
| Version | 3×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | |
| Number of cutting edges Z | 2 | |
| Through-coolant | yes | |
| Dia. range Dc | 13 mm - 13.49 mm | |
| Reach L1 | 41 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank length Ls | 48 mm | |
| Clamping screw | 231999 7IP (0.6 Nm) | |
| Overall length L | 112 mm | |
| Type of product | Indexable drill |
Números de identificación y clasificaciones
| Número de artículo | 231605 13 | |
| EAN / GTIN | 4045197602725 | |
| Número del fabricante | 231605 13 |
Descripción
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
HiPer-Drill base body 13 mm
a petición
En stock
11 piezas en stock
€292.10
más IVA en la tarifa actual
Gastos de envío no incluidos
|
a petición
En stock
7 piezas en stock
€319.70
más IVA en la tarifa actual
Gastos de envío no incluidos
|
|
| Dia. range Dc | 13 ;13.49 | 13 ;17.5 |
| Version | 3×D | 3×D |
| Through-coolant | yes | yes |
| Shank ⌀ Ds | 16 | 20 |
| Shank length Ls | 48 | 50 |
| Reach L1 | 41 | 34.9 |
| Type of product | Indexable drill | Indexable drill |