{{ name }}
Art-nr. {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
Indexable milling cutter 90° MEC11T, with threaded shank, ⌀ D / number of teeth Z: 25/3mm
Art-nr.: 227315 25/3
Artikelnummer:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Produktdetaljer
Tekniska data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| ⌀ D3 | 19 mm | |
| Circular interpolation milling ⌀ Dmin | 44 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.64 degrees | |
| Ramping length L for αmax | 18 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identifieringsnummer och klassificeringar
| Artikelnummer | 227315 25/3 | |
| EAN/GTIN | 4960664672929 | |
| Tillverkarens nummer | THN03509 |
Benämning
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Nedladdningar och dokument
Jämför med liknande produkter
Den här artikeln |
Rekommendationer |
||||
|---|---|---|---|---|---|
Indexable milling cutter 90° MEC11T, with threaded shank, ⌀ D / number of teeth Z: 25/3mm
på begäran
I lager
2 styck i lager
3 311,39 SEK
plus lagstadgad moms
Priser plus leveranskostnader
|
|||||
| Mounting thread M | M12 | M12 | M12 | M12 | M12 |
| Milling application | Circular milling; Ramping; End milling | Circular milling; Circular milling; Ramping | End milling; Circular milling; Ramping | End milling | Corner milling |
| Overall length Ltot | 35 mm | 35 mm | 35 mm | 35 mm | 30 mm |
| Through-coolant | yes | yes | yes | yes | yes |
| suitable indexable insert | BD.. 11T3 | AP.. 1335.. | AP.. 1003 | SO.. 0836.. | LO.U0904.. |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |