{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Frezy kątowe 90° GARANT Softcut MTC, z otworem, ⌀ D / liczba ostrzy Z: 50/4mm
Nr art.: 215160 50/4
Nr własny produktu:
- Setting angle κ: 90
- Milling application: Corner milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Szczegóły produktu
Dane techniczne
| Series | Softcut® | |
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| ⌀ D3 | 44 mm | |
| Circular interpolation milling ⌀ Dmin | 94 mm | |
| Circular interpolation milling ⌀ Dmax | 98 mm | |
| Circular interpolation milling ap | 0.9 mm | |
| Ramping angle αmax | 0.68 degrees | |
| Ramping length L for αmax | 41.95 mm | |
| suitable indexable insert | AP.. 1805.. | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Numery identyfikacyjne i klasyfikacje
| Numer artykułu | 215160 50/4 | |
| EAN / GTIN | 4045197349279 | |
| Numer producenta | 215160 50/4 |
Opis
Version:
High precision square shoulder milling cutter with irregular pitch for very smooth cutting, very high precision and cutting power. High performance indexable square shoulder milling cutter with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For corner milling to large depths, also slotting. General use in all steels including stainless steels.
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres (MTM).
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres (MTM).