{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | with threaded shank | |
Milling application | Circular milling; Plunging; Ramping | |
Machining strategy | HPC | |
Through-coolant | yes | |
⌀ D3 | 10 mm | |
maximum cutting depth ap max | 1.5 mm | |
Overall length Ltot | 35 mm | |
Mounting thread M | M12 | |
Circular interpolation milling ⌀ Dmin | 35 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 1.55 degrees | |
Ramping length L for αmax | 9.3 mm | |
suitable indexable insert | XD.. 0904 | |
Indexable insert size | 09 | |
Insert screw | 229917 (T15; 2.1 Nm) | |
Type of product | Copy mill |
Article number | 221905 25/2 | |
EAN / GTIN | 4059782503212 | |
Manufacturer number | 5667916 |
This article |
Recommendations |
|||
---|---|---|---|---|
High feed rate milling cutter 7792VX, with threaded shank, ⌀ D / number of teeth Z: 25/2mm |
||||
suitable indexable insert | XD.. 0904 | XD.. 09T308 | XDM.090416 | XOMU094812 |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm |
Machining strategy | HPC | HPC | HPC | HPC |
⌀ D3 | 10 mm | 9 mm | 13 mm | 15 mm |
Ramping angle αmax | 1.55 degrees | 2.02 degrees | 3.29 degrees | 2.74 degrees |
Ramping length L for αmax | 9.3 mm | 8.5 mm | 10.43 mm | 12.55 mm |