{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
Glodača glava za velike posmake MFH Harrier 25/2 mm
Artikl br.: 222050 25/2
Šifra artikla:
- Primjena glodala: Cirkularna glodala; Ramping; Plungen
- Through-coolant: da
- Strategija rezanja: HPC
Pojedinosti o proizvodu
Tehnički podaci
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Izvedba drške | Cilindrična drška | |
| Primjena glodala | Cirkularna glodala; Ramping; Plungen | |
| Through-coolant | da | |
| Strategija rezanja | HPC | |
| ⌀ D3 | 8 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overhang L1 | 60 mm | |
| Overall length Ltot | 140 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 33 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 2.79 degrees | |
| Ramping length L for αmax | 7.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Vrsta proizvoda | Glodača glava za kopirno glodanje |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 222050 25/2 | |
| EAN / GTIN | 4960664707454 | |
| Broj proizvođača | THN07610 |
Opis
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Preuzimanja i dokumenti
Usporedite sa sličnim proizvodima
Ovaj artikl |
Preporuke |
||
|---|---|---|---|
Glodača glava za velike posmake MFH Harrier 25/2 mm
na zahtjev
Na zalihi
5 dijelovi na zalihi
273,34 €
Plus PDV po trenutnoj stopi
Cijene plus troškovi dostave
|
|||
| Number of cutting edges Z | 2 | 2 | 2 |
| Overhang L1 | 60 mm | 120 mm | 70 mm |
| Overall length Ltot | 140 mm | 200 mm | 150 mm |
| Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |
| ⌀ D3 | 8 mm | 13 mm | 15 mm |
| Circular interpolation milling ⌀ Dmax | 48 mm | 48 mm | 48 mm |
| Ramping angle αmax | 2.79 degrees | 3.29 degrees | 2.74 degrees |