{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 20 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Milling profile | WR | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 35 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 41 mm | |
Overhang length L1 incl. recess | 52 mm | |
Recess ⌀ D1 | 19 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Corner rounding rv | 0.5 mm | |
Feed fz for slot milling in short-chipping aluminium | 0.25 mm | |
Feed fz for side milling in short-chipping aluminium | 0.28 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205250 20 | |
EAN / GTIN | 4062406122287 | |
Manufacturer number | 205250 20 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() GARANT Master Alu SlotMachine solid carbide roughing end mill HPC 20 mm
on request
In stock
59 pieces in stock
£279.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
£323.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
£288.36
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
£186.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
88 pieces in stock
£276.13
plus VAT at the current rate
Prices plus delivery costs
|
|
Colour ring | yellow | pink | pink | yellow | yellow |
Through-coolant | no | no | no | no | no |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
No. of teeth Z | 4 | 5 | 4 | 3 | 3 |
Machining strategy | HPC | HPC; TPC | HPC | HPC | HPC |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Corner rounding rv | 0.5 mm | 0.3 mm | 0.2 mm | 0.5 mm | 0.5 mm |