{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Foret à plaquettes KOMET KUB Quatron® Queue combinée 31 mm
Réf.: 235500 31
Référence:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Détails du produit
Caractéristiques techniques
| Series | KUB Quatron® | |
| Nominal ⌀ D | 31 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 62 mm | |
| for inch ⌀ | 1 7/32 in | |
| Overhang LA | 91 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| ISO code indexable insert | SOEX 090408 32-.. | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 146 mm | |
| Type of product | Indexable drill |
Numéros d’identification et classifications
| Référence article | 235500 31 | |
| EAN / GTIN | 4047109047358 | |
| Réf. fabricant | U10 23100 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Foret à plaquettes KOMET KUB Quatron® Queue combinée 31 mm
Sur demande
Non disponible
0 article(s) en stock
203,00 €
+ TVA en vigueur
Prix et frais de livraison
|
||||
| Number of cutting edges Z | 1 | 1 | 1 | 1 |
| Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D | 2×D |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling |
| Through-coolant | yes | yes | yes | yes |
| Shank ⌀ Ds | 32 mm | 32 mm | 40 mm | 32 mm |
| Reach L1 | 62 mm | 62 mm | 62 mm | 65 mm |
| for inch ⌀ | 1 7/32 in | 1 7/32 in | 1 7/32 in | 1 7/32 in |