{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HELI3MILL shoulder mill 40/4 mm
Article no.: 226490 40/4
Article code:
New product
- Setting angle κ: 90
- Milling application: Plunging; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HELI3MILL | |
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| ⌀ D3 | 35.6 mm | |
| Circular interpolation milling ⌀ Dmin | 75 mm | |
| Circular interpolation milling ⌀ Dmax | 79 mm | |
| Circular interpolation milling ap | 4 mm | |
| Ramping angle αmax | 2 degrees | |
| Ramping length L for αmax | 375.13 mm | |
| suitable indexable insert | TD..1505.. | |
| Manufacturer's designation | HM390 FTD D040-4-16-15 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226490 40/4 | |
| EAN / GTIN | 7291075313277 | |
| Manufacturer number | 3106798 |
Description
Version:
Reliable shoulder milling system for a wide range of applications. Versions in two system sizes with cutting edge lengths in 10 and 15 mm. Optimally supported Trigon indexable inserts in the seat ensure true 90° shoulders. Ideally suited for circular interpolation milling operations and ramping.
Spare part:
Pack of insert screws No. 229696 1 (IP20; 9.0 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
HELI3MILL shoulder mill 40/4 mm
on request
In stock
8 pieces in stock
514,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
261,05 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 4 | 4 |
| Milling application | Plunging ;Ramping ;Plunging | End milling |
| Overall length Ltot | 40 | 40 |
| Through-coolant | yes | yes |
| suitable indexable insert | TD..1505.. | SOMT 09T304 |
| Shank type | with bore | with bore |
| Setting angle κ | 90 | 90 |