{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
GARANT Softcut-hjørnefræser 90° MTC lang, Cylinderskaft, ⌀ D / antal skær Z: 20/4Lmm
Art.-nr.: 215609 20/4L
Sagsnummer:
- Indstillingsvinkel κ: 90
- Fræseanvendelse: Cirkulær fræsning; Ramping; Hjørnefræser
- Spacing of the cutters: ulige
- Through-coolant: ja
- Machining strategy: MTC
Produktdetaljer
Teknisk data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Cylinderskaft | |
| Indstillingsvinkel κ | 90 grader | |
| Fræseanvendelse | Cirkulær fræsning; Ramping; Hjørnefræser | |
| Spacing of the cutters | ulige | |
| Through-coolant | ja | |
| Machining strategy | MTC | |
| Værktøjsudskiftning | PowerCard | |
| Overhang L1 | 25 mm | |
| Overall length Ltot | 200 mm | |
| Shank ⌀ Ds h6 | 18 mm | |
| ⌀ D3 | 18 mm | |
| Circular interpolation milling ⌀ Dmin | 38 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Circular interpolation milling ap | 0.9 mm | |
| Ramping angle αmax | 0.68 degrees | |
| Ramping length L for αmax | 16.85 mm | |
| suitable indexable insert | AP.. 0602.. | |
| Pack of insert screws | 219827 (6IP; 0.45 Nm) | |
| Type of product | Hjørnefræser |
Identifikationsnumre og klassifikationer
| Artikelnummer | 215609 20/4L | |
| EAN/GTIN | 4045197409867 | |
| Producentnummer | 215609 20/4L |
Betegnelse
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power. Suitable inserts APMT 0602..
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless and acid-resistant steels.
Spare part:
Pack of insert screws No. 219827 (6IP; 0.45 Nm).