{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Foret à plaquettes, queue combinée, 2×D, ⌀ DC: 21mm
Réf.: 232298 21
Référence:
- Bohrtiefe für Wendeplattenbohrer bis: 2×D
- Schaft: DIN 6535 HE, DIN 6595
- Bohrverwendung: Zentrierbohren; ballig; bedingt Querbohren; Auskesselung; schräger Austritt; schräg Anbohren
- Innenkühlung: ja
- Zerspanungsstrategie: MTC
Détails du produit
Caractéristiques techniques
| Nenn-⌀ D | 21 | |
| Bohrtiefe für Wendeplattenbohrer bis | 2×D | |
| Schaft | DIN 6535 HE, DIN 6595 | |
| Bohrverwendung | Zentrierbohren; ballig; bedingt Querbohren; Auskesselung; schräger Austritt; schräg Anbohren | |
| Innenkühlung | ja | |
| Zerspanungsstrategie | MTC | |
| Nutzlänge L1 | 42 mm | |
| Auskraglänge LA | 66 mm | |
| Schaft-⌀ Ds | 25 mm | |
| Schaftlänge Ls | 56 mm | |
| Maximale Verstellgrenze Vmax | 0,5 mm | |
| ISO-Code Wendeschneidplatte | WOEX 040304 | |
| Wendeplattenschrauben-Set | 239700 6IP1 (1,0 Nm) | |
| Anzahl Schneiden Z | 1 | |
| Gesamtlänge L | 122 mm | |
| Produktart | Wendeplattenbohrer |
Numéros d’identification et classifications
| Référence article | 232298 21 | |
| EAN / GTIN | 4045197676931 | |
| Réf. fabricant | 232298 21 |
Description
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Inserts WOEX 040304.
Note:
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Foret à plaquettes, queue combinée, 2×D, ⌀ DC: 21mm
Sur demande
Disponibilité
10 article(s) en stock
CHF 301.00
+ TVA en vigueur
Prix et frais de livraison
|
|||
| Bohrtiefe für Wendeplattenbohrer bis | 2×D | 2×D | 2×D |
| Bohrverwendung | Zentrierbohren; ballig; bedingt Querbohren; Auskesselung; schräger Austritt; schräg Anbohren | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling |
| Nenn-⌀ D | 21 | 21 | 21 |
| Schaft | DIN 6535 HE, DIN 6595 | ISO 9766 | ISO 9766 |
| Schaftlänge Ls | 56 mm | 56 mm | 56 mm |
| Zerspanungsstrategie | MTC | HPC | HPC |
| Nutzlänge L1 | 42 mm | 42 mm | 45 mm |