{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Osnovni element za HiPer-Drill 16 mm
Št. art.: 231605 16
Koda izdelka:
- Izvedba: 3×D
- Držalo: ISO 9766
- Uporaba vrtanja: pogojno prečno vrtanje; pogojno paketno vrtanje; pogojno poševen izhod; pogojno poševno navrtanje
- Number of cutting edges Z: 2
- z notranjim hlajenjem: da
Podrobnosti o izdelku
Tehnični podatki
| Series | HiPer-Drill | |
| Izvedba | 3×D | |
| Držalo | ISO 9766 | |
| Uporaba vrtanja | pogojno prečno vrtanje; pogojno paketno vrtanje; pogojno poševen izhod; pogojno poševno navrtanje | |
| Number of cutting edges Z | 2 | |
| z notranjim hlajenjem | da | |
| Dia. range Dc | 16 mm - 16.99 mm | |
| Reach L1 | 51 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| Clamping screw | 231999 8IP1 (1.2 Nm) | |
| Overall length L | 128 mm | |
| Vrsta izdelka | Sveder za obračalne ploščice |
Identifikacijske številke in klasifikacije
| Številka izdelka | 231605 16 | |
| EAN/GTIN | 4045197602770 | |
| Številka proizvajalca | 231605 16 |
Opis
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.