{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Podrobnosti o izdelku
Tehnični podatki
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| suitable indexable insert | XNEX 0806.. | |
| Pack of insert screws | 219798 1 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Identifikacijske številke in klasifikacije
| Številka izdelka | 215102 80/7 | |
| EAN/GTIN | 4062406088002 | |
| Številka proizvajalca | 215102 80/7 |
Opis
Version:
Robust shoulder milling cutter. Insert seats enclose the inserts on several sides for stable machining conditions.
For use in combination with indexable insert 215117 UNI as a high feed rate indexable face mill.
For use in combination with indexable insert 215117 UNI as a high feed rate indexable face mill.
Application:
With double-sided 3-edge inserts XNEX0806.. or single-sided 3-edge inserts XNEX0806.. High feed rate.
Note:
Primerjajte s podobnimi izdelki
Tega članka |
Priporočilo: |
||||
|---|---|---|---|---|---|
Shoulder mill 90° 80/7 mm
po ponudbi
Na zalogi
105 kosov na zalogi
BGN 996.38
plus DDV po trenutni stopnji
in strošek dostave
|
po ponudbi
Na zalogi
20 kosov na zalogi
BGN 1,126.83
plus DDV po trenutni stopnji
in strošek dostave
|
po ponudbi
Na zalogi
26 kosov na zalogi
BGN 1,664.39
plus DDV po trenutni stopnji
in strošek dostave
|
po ponudbi
Na zalogi
54 kosov na zalogi
BGN 1,279.78
plus DDV po trenutni stopnji
in strošek dostave
|
||
| Number of cutting edges Z | 7 | 7 | 7 | 7 | 7 |
| Milling application | End milling | Corner milling | End milling | Corner milling | End milling |
| Overall length Ltot | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
| Shank type | with bore | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 80 mm | 80 mm | 80 mm | 80 mm | 80 mm |
| Pack of insert screws | 219798 1 (15IP; 3.8 Nm) | 219863 (8IP; 2.2 Nm) | 219812 (15IP; 5.0 Nm) | 219882 (15IP; 3.0 Nm) | 219798 1 (15IP; 3.8 Nm) |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |