{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 5.1 mm | |
Coating | TiAlN | |
Tool material | HSS Co 8 | |
Standard | DIN 338 | |
Tolerance nominal ⌀ | h8 | |
Point angle | 135 degrees | |
Helix angle | 35 degrees | |
Shank | Plain shank | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
recommended maximum drilling depth L2 | 44.4 mm | |
Flute length Lc | 52 mm | |
Overall length L | 86 mm | |
Shank ⌀ Ds | 5.1 mm | |
Feed f in stainless steel > 900 N/mm2 | 0.04 mm/rev. | |
Colour ring | blue | |
Type of product | Jobber drill |
Article number | 114550 5,1 | |
EAN / GTIN | 4045197021007 | |
Manufacturer number | 114550 5,1 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
HSS-Co8 jobber drill, TiAlN, ⌀ DC h8: 5,1mm |
|||||||
Coating | TiAlN | uncoated | uncoated | uncoated | TiAlN | TiAlN | TiAlN |
Colour ring | blue | red | without | without | blue | green | green |
Overall length L | 86 mm | 86 mm | 86 mm | 86 mm | 86 mm | 86 mm | 86 mm |
Point angle | 135 degrees | 130 degrees | 135 degrees | 130 degrees | 130 degrees | 118 degrees | 130 degrees |
Flute length Lc | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm |
Shank ⌀ Ds | 5.1 mm | 5.1 mm | 5.1 mm | 5.1 mm | 5.1 mm | 5.1 mm | 5.1 mm |
Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |