{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
HiPer-Drill stomme 5×D 18 mm GARANT
Article no.: 231610 18
Artikkelkode:
- Utförande: 5×D
- Skaft: ISO 9766
- Borranvändning: kräver kryssborrning; kräver paketborrning; kräver snedställd utgång; kräver snedställd borrstart
- Antal skär Z: 2
- Invändig: ja
Produktinformasjon
Technical Data
| Serie | HiPer-Drill | |
| Utförande | 5×D | |
| Skaft | ISO 9766 | |
| Borranvändning | kräver kryssborrning; kräver paketborrning; kräver snedställd utgång; kräver snedställd borrstart | |
| Antal skär Z | 2 | |
| Invändig | ja | |
| Diameterområde Dc | 18 mm - 18,99 mm | |
| Effektiv längd L1 | 95 mm | |
| Skaftdiameter Ds | 25 mm | |
| Skaftlängd Ls | 56 mm | |
| Spännskruv | 231999 8IP1 (1,2 Nm) | |
| totallängd L | 180 mm | |
| Produktslag | Vändskärsborrar |
Identification numbers & Classifications
| Artikkelkode | 231610 18 | |
| EAN / GTIN | 4045197603012 | |
| Manufacturer number | 231610 18 |
Beskrivelse
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HiPer-Drill stomme 5×D 18 mm GARANT
on request
På lager
Available in 11-14 working days
34 styck i lager
34 pieces available in 11-14 working days
NOK 5 167,92
plus VAT at the current rate
Prices plus delivery costs
|
|||
| Diameterområde Dc | 18 mm - 18,99 mm | 18 mm - 24 mm | 18 mm - 24 mm |
| Antal skär Z | 2 | 2 | 2 |
| Utförande | 5×D | 5×D | 5×D |
| Invändig | ja | yes | yes |
| Skaft | ISO 9766 | ISO 9766 | Morse taper |
| Effektiv längd L1 | 95 mm | 168.3 mm | 171.5 mm |
| Produktslag | Vändskärsborrar | Indexable drill | Indexable drill |