{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 80 mm | |
Number of cutting edges Z | 6 | |
Shank type | with bore | |
Milling application | Circular milling; Plunging; Ramping | |
Through-coolant | yes | |
Machining strategy | HPC | |
⌀ D3 | 56 mm | |
maximum cutting depth ap max | 2 mm | |
maximum cutting depth ap max for LD geometry | 5 mm | |
Overall length Ltot | 63 mm | |
Mounting bore ⌀ | 27 mm | |
Circular interpolation milling ⌀ Dmin | 136 mm | |
Circular interpolation milling ⌀ Dmax | 158 mm | |
Ramping angle αmax | 0.38 degrees | |
Ramping length L for αmax | 55 mm | |
Indexable insert size | 14 | |
suitable indexable insert | SOMT.. | |
Insert screw | 229719 (20 IP; 4.5 Nm) | |
Setting angle κ | 10 degrees | |
Fz Helix | 0.7 | |
Type of product | Copy mill |
Article number | 222065 80/6 | |
EAN / GTIN | 4960664707751 | |
Manufacturer number | THN07695 |
This article |
Recommendations |
|||
---|---|---|---|---|
High feed rate milling cutter MFH Harrier, with bore, ⌀ D / number of teeth Z: 80/6mm |
||||
Number of cutting edges Z | 6 | 6 | 6 | 6 |
Mounting bore ⌀ | 27 mm | 27 mm | 32 mm | 27 mm |
Setting angle κ | 10 degrees | 15 – 30 degrees | 12 degrees | 15 – 30 degrees |
Milling application | Circular milling; Plunging; Ramping | Circular milling; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping |
Through-coolant | yes | yes | yes | yes |
⌀ D3 | 56 mm | 64 mm | 59 mm | 64 mm |
Fz Helix | 0.7 | 0.7 | 0.7 | 0.7 |