{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ZDET 16M540 FR-721 ALU
Article no.: 220828 ALU
Article code:
Product details
Technical Data
| ISO code indexable insert | ZDET 16M540 FR-721 | |
| Type | ALU | |
| Grade | GH1 | |
| Tool material | Carbide | |
| fz for roughing up to ap max 16 mm | 0.12 mm - 0.25 mm | |
| fz for pre-finishing ap = 3 mm | 0.05 mm - 0.15 mm | |
| fz for finishing ap = 1 mm | 0.02 mm - 0.1 mm | |
| Insert thickness S | 5 mm | |
| Number of changes/inserts | 2 | |
| Corner radius | 4 mm | |
| Type of product | Indexable insert for milling |
Identification numbers & Classifications
| Article number | 220828 ALU | |
| EAN / GTIN | 4059782503892 | |
| Manufacturer number | 5665950 |
Application Table
N
1640
N
1370
N
1095
Description
Recommendation:
When exchanging the indexable inserts, please also replace the screws. Spare screws are supplied with the indexable inserts.
Note:
fz for ae = 0.3×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
ZDET 16M540 FR-721 ALU |
||||
| Number of changes/inserts | 2 | 1 | 1 | 1 |
| Corner radius | 4 | 4 | 4 | 4 |
| Tool material | Carbide | Carbide | Carbide | Carbide |
| Grade | HU7810 | HU7810 | HU7810 | |
| Type | ALU | ALU | ALU | ALU |
| Feed f z in short-chipping aluminium | 0.35 | 0.24 | 0.3 | |
| Type of product | Indexable insert for milling | Indexable insert for milling | Indexable insert for milling | Indexable insert for milling |