{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Precision taper sheet and tube drill HSS, uncoated, Cutter ⌀ DC: 3-14mm
Article no.: 118020 3-14
Copy
Article code:
Copy
- Tool material: HSS
- Standard: Manufacturer’s standard
- Shank: Three drive flats shank
Offers
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm - 14 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | Manufacturer’s standard | |
| Shank | Three drive flats shank | |
| Overall length | 58 mm | |
| Shank ⌀ | 6 mm | |
| Colour ring | without | |
| Type of product | Stepped drill |
Identification & Classification
| Article number |
118020 3-14
Copy |
|
| EAN / GTIN |
4045197036421
Copy |
|
| Manufacturer number |
118020 3-14
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
K
ISO code:
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Application:
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.