KUB Pentron® indexable drill Plain shank 31,5 mm

Article no.: 236601 31,5

⌀ D_C m7 (mm):

Quantity

Drill depth for indexable insert drill up to: 4×D
Shank: ISO 9766
Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant: yes
Machining strategy: HPC

Product details

Series		KUB Pentron®
Nominal ⌀ D		31.5
Drill depth for indexable insert drill up to		4×D
Shank		ISO 9766
Use for drilling		limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant		yes
Machining strategy		HPC
Reach L₁		128 mm
Overhang L_A		152 mm
Shank ⌀ D_s		40 mm
Shank length L_s		68 mm
ISO code indexable insert		SOGX 100408 32-...
Pack of insert screws		239652 15IP1 (2.8 Nm)
Number of cutting edges Z		1
Type of product		Indexable drill

Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
Best dimensional accuracy under very difficult drilling conditions.
Stock costs reduced because internal and external inserts are identical.
Offset-axis drilling is possible up to V_max = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.

Bore tolerance: ⌀D − 0.1 / + 0.3

With indexable inserts No. 236605 − 236610.

Clamp screws (without indexable inserts).

Version 2×D and 3×D with ABS^® also available on request in imperial sizes.
Version with PSC shank available on request.

	This article	Recommendations
	KUB Pentron® indexable drill Plain shank 31,5 mm	GARANT Power Drill indexable drill Combination shank 31,5 mm
Drill depth for indexable insert drill up to	4×D	4×D
ISO code indexable insert	SOGX 100408 32-...	SOGX 100408
Nominal ⌀ D	31.5	31.5
Machining strategy	HPC	HPC
Series	KUB Pentron®	Power Drill
Type of product	Indexable drill	Indexable drill
Overhang L_A	152	152