{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Chamfering angle reverse: 45
- Through-coolant: no
Product details
Technical Data
| Shank type | Weldon shank | |
| Chamfering angle reverse | 45 degrees | |
| Through-coolant | no | |
| Number of cutting edges Z | 2 | |
| ⌀ D | 16 mm | |
| maximum chamfering ⌀ Dmax | 28.8 mm | |
| Overhang L1 | 32 mm | |
| Overall length Ltot | 100 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| suitable indexable insert | SP..09T308 | |
| Pack of insert screws | 219841 (15IP; 3.0 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 216625 16 | |
| EAN / GTIN | 4045197940193 | |
| Manufacturer number | 216625 16 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Chamfer mill 45° 16 |
||||
| ⌀ D | 16 | 16 | 16 | 15.8 |
| Number of cutting edges Z | 2 | 2 | 5 | 2 |
| Overhang L1 | 32 | 20.5 | 20 | 35 |
| Overall length Ltot | 100 | 110 | 110 | 90 |
| Through-coolant | no | yes | yes | yes |
| maximum chamfering ⌀ Dmax | 28.8 | 28.3 | 22.7 | 26 |
| Shank type | Weldon shank | Weldon shank | Plain shank | Weldon shank |