{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
GARANT Master Titan VHM mini glodalo HPC 0,2 mm
Artikl br.: 202287 0,2
Šifra artikla:
- Rezalni material: VHM
- Standard: Tovarniški standard
- Tip: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Pojedinosti o proizvodu
Tehnički podaci
| Serija | Master Titan | |
| Cutting edge ⌀ DC | 0.2 mm | |
| Prevleka | TiAlN | |
| Rezalni material | VHM | |
| Standard | Tovarniški standard | |
| Tip | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Delovna širina ae pri rezkanju | Rezkanje utorov v polno, globina 1×D; 0,5×D pri robljenju | |
| Shank | DIN 6535 HA to h6 | |
| z notranjim hlajenjem | ne | |
| Strategija odrezovanja | HPC | |
| Flute length Lc | 0.6 mm | |
| Overall length L | 44 mm | |
| Shank ⌀ Ds | 4 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in titanium > 850 N/mm2 | 0.002 mm | |
| Barvni prstan | rožnata | |
| Vrsta izdelka | Kotni rezkar |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 202287 0,2 | |
| EAN / GTIN | 4062406270896 | |
| Broj proizvođača | 202287 0,2 |
Tablica aplikacija
S
60
Opis
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Attractively priced and extra stable version for high-power machining of titanium.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Attractively priced and extra stable version for high-power machining of titanium.