{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer 5 mm HOLEX
Article no.: 164180 5
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 4,760 mm - 5,050 mm | |
| Flute length Lc | 23 mm | |
| Overhang L1 | 63 mm | |
| Overall length L | 133 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0,1 mm/rev. | |
| Reaming oversize in diameter | 0,1 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 5 | |
| EAN / GTIN | 4045197092175 | |
| Manufacturer number | 164180 5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer 5 mm HOLEX
on request
Unknown
0 pieces in stock
99,82 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3.312 pieces in stock
18,39 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
45,23 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
431 pieces in stock
37,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
61 pieces in stock
58,29 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
54,87 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Nombre de dents Z | 6 | 6 | 6 | 6 | 6 | 6 |
| Revêtement | uncoated | non revêtu | non revêtu | non revêtu | TiN | non revêtu |
| Longueur totale L | 133 | 86 | 86 | 86 | 86 | 133 |
| ⌀ nom. DC | 5 | 5 | 5 | 5 | 5 | 5 |
| Norme | DIN 208 B | Norme usine | Norme usine | DIN 212 B | DIN 212 B | DIN 208 B |
| Queue | Morse taper | DIN 1835 A avec h6 | DIN 1835 A avec h6 | Queue cylindrique avec h9 | Queue cylindrique avec h9 | Cône morse |
| Longueur de coupe Lc | 23 | 23 | 23 | 23 | 23 | 23 |