{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer 16 mm HOLEX
Article no.: 164180 16
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 15,510 mm - 16,000 mm | |
| Flute length Lc | 52 mm | |
| Overhang L1 | 127 mm | |
| Overall length L | 210 mm | |
| Number of cutting edges Z | 8 | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0,2 mm/rev. | |
| Reaming oversize in diameter | 0,2 mm - 0,3 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 16 | |
| EAN / GTIN | 4045197092397 | |
| Manufacturer number | 164180 16 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer 16 mm HOLEX
on request
Unknown
0 pieces in stock
135,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
674 pieces in stock
54,63 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
122,48 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
119,03 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
189,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
115 pieces in stock
80,04 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 127 | 123 | 123 | 124 | 120 | 127 |
| Colour ring | without | green | without | without | without | without |
| Nominal ⌀ DC | 16 | 16 | 16 | 16 | 16 | 16 |
| Tool material | HSS E | HSS E | HSS E | HSS E | HSS E | HSS E |
| Feed f in steel < 750 N/mm2 | 0,2 | 0,3 | 0,3 | 0,3 | 0,3 | 0,2 |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |
| Reaming oversize in diameter | 0,2 ;0,3 | 0,1 ;0,3 | 0,2 ;0,3 | 0,2 ;0,3 | 0,2 ;0,3 | 0,2 ;0,3 |