{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer 15 mm HOLEX
Article no.: 164180 15
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 15 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 14,510 mm - 15,050 mm | |
| Flute length Lc | 50 mm | |
| Overhang L1 | 121 mm | |
| Overall length L | 204 mm | |
| Number of cutting edges Z | 8 | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0,2 mm/rev. | |
| Reaming oversize in diameter | 0,2 mm - 0,3 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 15 | |
| EAN / GTIN | 4045197092373 | |
| Manufacturer number | 164180 15 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Machine reamer 15 mm HOLEX
on request
Unknown
0 pieces in stock
130,53 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
155 pieces in stock
51,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
118,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
115,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
70 pieces in stock
78,89 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 |
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated |
| Overall length L | 204 | 162 | 162 | 162 | 204 |
| Through-coolant | no | no | no | no | no |
| Application for type of drilling | for through hole | for through holes | for through holes | for through holes | for through hole |
| Feed f in steel < 750 N/mm2 | 0,2 | 0,3 | 0,3 | 0,3 | 0,2 |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |