{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC reamer H7 5 mm GARANT
Article no.: 162900 5
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
Offers
Product details
Technical Data
| Nominal ⌀ DC | 5 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 23 mm | |
| Overhang L1 | 57 mm | |
| Overall length L | 86 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 5 mm | |
| Feed f in steel < 750 N/mm2 | 0,2 mm/rev. | |
| Reaming oversize in diameter | 0,1 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162900 5 | |
| EAN / GTIN | 4045197090164 | |
| Manufacturer number | 162900 5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. For highest concentricity and process reliability. No need to order special collets.
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7 both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7 both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
NC reamer H7 5 mm GARANT
on request
In stock
3.100 pieces in stock
21,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
51,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
317 pieces in stock
42,44 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
43 pieces in stock
66,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
62,79 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
99,82 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 6 | 6 | 6 | 6 | 6 |
| Overhang L1 | 57 mm | 57 mm | 57 mm | 54 mm | 63 mm | 63 mm |
| Colour ring | green | without | without | without | without | without |
| Overall length L | 86 mm | 86 mm | 86 mm | 86 mm | 133 mm | 133 mm |
| Through-coolant | no | no | no | no | no | no |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |
| Reaming oversize in diameter | 0,1 mm | 0,1 mm | 0,1 mm | 0,1 mm | 0,1 mm | 0,1 mm |