{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7, Nominal ⌀ DC: 24mm
Article no.: 160150 24
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 24 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 115 mm | |
| Overhang L1 | 140 mm | |
| Overall length L | 231 mm | |
| Number of cutting edges Z | 8 | |
| Shank square □ | 20 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 24 | |
| EAN / GTIN | 4045197937353 | |
| Manufacturer number | 160150 24 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Hand reamer H7, Nominal ⌀ DC: 24mm
on request
In stock
69 pieces in stock
134,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
43 pieces in stock
125,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
204,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
315,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
294,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
125,35 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 | 8 |
| Overhang L1 | 140 mm | 167 mm | 167 mm | 125 mm | 115 mm | 145 mm |
| Overall length L | 231 mm | 268 mm | 268 mm | 180 mm | 180 mm | 231 mm |
| Standard | DIN 206 B | DIN 208 B | DIN 208 B | Manufacturer’s standard | Manufacturer’s standard | DIN 206 B |
| Flute length Lc | 115 mm | 68 mm | 68 mm | 25 mm | 25 mm | 115 mm |
| Tool material | HSS | HSS E | HSS E | HSS | HSS | HSS |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |