{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7, Nominal ⌀ DC: 13mm
Article no.: 160150 13
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 13 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 76 mm | |
| Overhang L1 | 96 mm | |
| Overall length L | 152 mm | |
| Number of cutting edges Z | 8 | |
| Shank square □ | 10 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 13 | |
| EAN / GTIN | 4045197937278 | |
| Manufacturer number | 160150 13 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Hand reamer H7, Nominal ⌀ DC: 13mm
on request
In stock
62 pieces in stock
66,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
210,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
224,83 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
328 pieces in stock
217,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
279,45 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 |
| Overhang L1 | 96 mm | 104 mm | 104 mm | 99 mm | 99 mm |
| Colour ring | without | green | green | green | green |
| Standard | DIN 206 B | DIN 8093 | DIN 8093 | Manufacturer’s standard | Manufacturer’s standard |
| Flute length Lc | 76 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Tool material | HSS | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Application for type of drilling | for through hole | for through holes | for through hole | for through holes | for through holes |