{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7, Nominal ⌀ DC: 32mm
Article no.: 160150 32
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 32 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 133 mm | |
| Overhang L1 | 165 mm | |
| Overall length L | 265 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 25 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 32 | |
| EAN / GTIN | 4045197937407 | |
| Manufacturer number | 160150 32 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Hand reamer H7, Nominal ⌀ DC: 32mm
on request
In stock
27 pieces in stock
216,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
208,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
330,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
190,33 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 10 | 10 |
| Overhang L1 | 165 mm | 190 mm | 190 mm | 168 mm |
| Overall length L | 265 mm | 317 mm | 317 mm | 265 mm |
| Nominal ⌀ DC | 32 mm | 32 mm | 32 mm | 32 mm |
| Flute length Lc | 133 mm | 77 mm | 77 mm | 133 mm |
| Tool material | HSS | HSS E | HSS E | HSS |
| Helix angle | 7-8 degrees | 7-8 degrees | 7-8 degrees | 7-8 degrees |