{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 35 mm
Article no.: 160150 35
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 35 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 142 mm | |
| Overhang L1 | 175 mm | |
| Overall length L | 284 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 28 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 35 | |
| EAN / GTIN | 4045197937414 | |
| Manufacturer number | 160150 35 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Hand reamer H7 35 mm
on request
In stock
36 pieces in stock
264,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
234,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
364,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
427,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
407,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
231,15 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 10 | 8 | 8 | 10 |
| Overhang L1 | 175 mm | 195 mm | 195 mm | 139 mm | 139 mm | 177 mm |
| Colour ring | without | without | without | green | green | without |
| Nominal ⌀ DC | 35 mm | 35 mm | 35 mm | 35 mm | 35 mm | 35 mm |
| Flute length Lc | 142 mm | 78 mm | 78 mm | 25 mm | 25 mm | 142 mm |
| Tool material | HSS | HSS E | HSS E | HSS | HSS | HSS |
| Application for type of drilling | for through hole | for through hole | for through hole | for through holes | for blind holes | for through holes |