{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 18 mm
Article no.: 160150 18
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 18 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 93 mm | |
| Overhang L1 | 113 mm | |
| Overall length L | 188 mm | |
| Number of cutting edges Z | 8 | |
| Shank square □ | 14 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 18 | |
| EAN / GTIN | 4045197937322 | |
| Manufacturer number | 160150 18 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Hand reamer H7 18 mm
on request
In stock
66 pieces in stock
92,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
233,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
92,92 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 |
| Colour ring | without | green | without |
| Overall length L | 188 mm | 150 mm | 188 mm |
| Nominal ⌀ DC | 18 mm | 18 mm | 18 mm |
| Flute length Lc | 93 mm | 25 mm | 93 mm |
| Tool material | HSS | HSS | HSS |
| Application for type of drilling | for through hole | for through holes | for through holes |