{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiPer-Drill base body, 1.5×D, ⌀ DC: 25mm
Article no.: 231600 25
Article code:
- Version: 1.5×D
- Shank: ISO 9766
- Use for drilling: limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
- Through-coolant: yes
Product details
Technical Data
| Version | 1.5×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | |
| Through-coolant | yes | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 231600 25 | |
| EAN / GTIN | 4045197602640 | |
| Manufacturer number | 231600 25 |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HiPer-Drill base body, 1.5×D, ⌀ DC: 25mm
on request
In stock
24 pieces in stock
£328.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
£264.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
£284.66
plus VAT at the current rate
Prices plus delivery costs
|
|
| Dia. range Dc | 25 mm - 35 mm | 25 mm - 35 mm | |
| Number of cutting edges Z | 2 | 2 | |
| Version | 1.5×D | 1.5×D | 1.5×D |
| Through-coolant | yes | yes | yes |
| Shank | ISO 9766 | ISO 9766 | Morse taper |
| Reach L1 | 52.5 mm | 52.5 mm | |
| Type of product | Indexable drill | Indexable drill | Indexable drill |