{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
KOMET KUB Pentron® vendeplatte-korthulsbor Cylinderskaft, 4×D, ⌀ DC m7: 32,5mm
Art.-nr.: 236601 32,5
Sagsnummer:
- Drill depth for indexable insert drill up to: 4×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Produktdetaljer
Teknisk data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 32.5 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 132 mm | |
| for inch ⌀ | 1 9/32 in | |
| Overhang LA | 157 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| ISO code indexable insert | SOGX 100408 32-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identifikationsnumre og klassifikationer
| Artikelnummer | 236601 32,5 | |
| EAN/GTIN | 4047109198425 | |
| Producentnummer | U44 33250 |
Betegnelse
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.3
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Downloads og dokumenter
Sammenlign med lignende produkter
Denne artikel |
Anbefalinger |
|
|---|---|---|
KOMET KUB Pentron® vendeplatte-korthulsbor Cylinderskaft, 4×D, ⌀ DC m7: 32,5mm
på forespørgsel
Kan leveres på 1-2 uger
0 styk på lager
5.177,68 DKK
plus moms
plus fragt
|
||
| Drill depth for indexable insert drill up to | 4×D | 4×D |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | 239700 15IP (2.8 Nm) |
| Machining strategy | HPC | HPC |
| Series | KUB Pentron® | Power Drill |
| for inch ⌀ | 1 9/32 in | 1 9/32 in |
| Type of product | Indexable drill | Indexable drill |
| Overhang LA | 157 mm | 157 mm |