{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISCAR SUMOCHAM drilling head ICM k7 23 mm
Article no.: 231750 23
Article code:
New product
Click to enlarge image
Click to enlarge image
154° point angle / 140° cutter angle
- Tool material: Carbide
- Point angle: 154
Product details
Technical Data
| Series | SUMOCHAM | |
| ⌀ D | 23 mm | |
| Grade | IC908 | |
| Tool material | Carbide | |
| Point angle | 154 degrees | |
| for base body size | 23 | |
| Feed f in stainless steel > 900 N/mm2 | 0.24 mm/rev. | |
| Feed f in Inconel® | 0.18 mm/rev. | |
| Iscar item designation | ICM 230 IC908 | |
| Number of changes/inserts | 2 | |
| Coating | TiAlN | |
| Geometry | ICM | |
| Manufacturer's designation | ICM 230 IC908 | |
| Type of product | Drilling head for boring |
Identification numbers & Classifications
| Article number | 231750 23 | |
| EAN / GTIN | 7291075243949 | |
| Manufacturer number | 5506712 |
Application Table
N
155
N
120
P
100
P
90
P
100
P
70
P
55
H
70
H
60
M
50
M
50
S
35
S
35
K
120
N
155
Description
Version:
Vee ground drilling head for precise positioning and stable seating. Angled, radial stop surfaces for a significant increase in clamping force due to the cutting forces acting during machining. For productive drilling with high feed rates.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
Note:
Cutting data applies for the base body 5×D. Drill pilot holes exclusively with drilling head of the same type – in particular for drilling heads FCP and QCP-2M. Please observe the application instructions for the base body. Cutting tolerance of the inserts: k7 (positive toleranced cutting edge diameter).
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
ISCAR SUMOCHAM drilling head ICM k7 23 mm
on request
In stock
16 pieces in stock
BGN 344.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
BGN 301.39
plus VAT at the current rate
Prices plus delivery costs
|
|
| ⌀ D | 23 | 23 |
| Coating | TiAlN | TiAlN |
| Tool material | Carbide | Carbide |
| Grade | IC908 | HB3040 |
| for base body size | 23 | 23 |
| Series | SUMOCHAM | HiPer-Drill |
| Type of product | Drilling head for boring | Cutter insert for boring |