{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pull stud 45° sealed, without bore, suitable for steep tapers: 30
Article no.: 308760 30
Article code:
- Pull stud standard: MAS 403
Product details
Technical Data
| suitable for steep tapers | 30 | |
| Hole characteristics | without bore | |
| Pull stud standard | MAS 403 | |
| Collar ⌀ D | 16.5 mm | |
| Head ⌀ D1 | 11 mm | |
| Overall length L | 43 mm | |
| L1 | 23 mm | |
| Thread M | M12 | |
| maximum tightening torque | 20 Nm | |
| suitable for taper arbors with colour code | SK 30 | |
| Width across flats | 13 mm | |
| Type of product | Pull Stud |
Identification & Classification
| Article number | 308760 30 | |
| EAN / GTIN | 4045197648013 | |
| Manufacturer number | 308760 30 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.