{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Copy mill 0° negative 80/7 mm
Article no.: 212145 80/7
Article code:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 68 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| Circular interpolation milling ⌀ Dmin | 148 mm | |
| Circular interpolation milling ⌀ Dmax | 158 mm | |
| Circular interpolation milling ap | 2.5 mm | |
| Ramping angle αmax | 0.74 degrees | |
| Ramping length L for αmax | 64.94 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Setting angle κ | 15 – 27 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212145 80/7 | |
| EAN / GTIN | 4045197192813 | |
| Manufacturer number | 212145 80/7 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Copy mill 0° negative 80/7 mm
on request
In stock
20 pieces in stock
US $ 468.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
US $ 600.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
US $ 468.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
US $ 572.69
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 7 | 7 | 7 | 7 |
| Mounting bore ⌀ | 27 | 32 | 27 | 27 |
| Milling application | Circular milling ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping | Circular milling ;Circular milling |
| Overall length Ltot | 50 | 50 | 50 | 50 |
| suitable indexable insert | RD..12T3 | XD.. 09T308 | RD..12T3 | RPK.1204M0T |
| Shank type | with bore | with bore | with bore | with bore |
| Fz Helix | 0.7 | 0.7 | 0.7 | 0.7 |