{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 4mm
Article no.: 202680 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overall length L | 40 mm | |
| Shank ⌀ Ds | 4 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.023 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202680 4 | |
| EAN / GTIN | 4045197117755 | |
| Manufacturer number | 202680 4 |
Application Table
N
140
N
105
P
70
P
60
P
55
P
35
M
40
K
55
Description
Version:
Eccentric relief ground.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 4mm
on request
In stock
309 pieces in stock
US $ 20.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
103 pieces in stock
US $ 22.11
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
185 pieces in stock
US $ 66.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
US $ 66.94
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | uncoated |
| Colour ring | without | without | yellow | yellow |
| Through-coolant | no | no | no | no |
| Cutting edge ⌀ DC | 4 mm | 4 mm | 4 mm | 4 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Type | N | N | W | W |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |