{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 10mm
Article no.: 191720 10
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 27-30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.028 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191720 10 | |
| EAN / GTIN | 4045197104946 | |
| Manufacturer number | 191720 10 |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Size 10 − 30 centre cutting teeth for plunging.
or a considerable performance improvement with special ground chip breaker flutes.
or a considerable performance improvement with special ground chip breaker flutes.
Advantage:
The chip breaker flutes facilitate chip evacuation and at the same time ensure a good component surface finish.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 10mm
on request
In stock
161 pieces in stock
US $ 59.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
557 pieces in stock
US $ 18.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
395 pieces in stock
US $ 26.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
346 pieces in stock
US $ 31.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
970 pieces in stock
US $ 16.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,130 pieces in stock
US $ 23.43
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 72 mm | 72 mm | 72 mm | 72 mm | 72 mm | 72 mm |
| Standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| No. of teeth Z | 4 | 3 | 3 | 3 | 4 | 4 |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |