{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 28 mm
Article no.: 160150 28
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 28 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 124 mm | |
| Overhang L1 | 150 mm | |
| Overall length L | 247 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 22.4 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 28 | |
| EAN / GTIN | 4045197937384 | |
| Manufacturer number | 160150 28 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Hand reamer H7 28 mm
on request
In stock
43 pieces in stock
US $ 215.31
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
US $ 173.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
US $ 275.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
US $ 216.13
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 10 | 10 |
| Overhang L1 | 150 mm | 177 mm | 177 mm | 155 mm |
| Colour ring | without | without | without | without |
| Overall length L | 247 mm | 277 mm | 277 mm | 247 mm |
| Tool material | HSS | HSS E | HSS E | HSS |
| Helix angle | 7-8 degrees | 7-8 degrees | 7-8 degrees | 7-8 degrees |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit |