{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide jobber drill, uncoated, ⌀ DC h7: 4,5mm
Article no.: 122250 4,5
Article code:
- Tool material: Solid carbide
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 4.5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 118 degrees | |
| recommended maximum drilling depth L2 | 40.3 mm | |
| Helix angle | 30 degrees | |
| Shank | Parallel shank to h7 | |
| Through-coolant | no | |
| Flute length Lc | 47 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 4.5 mm | |
| Shank tolerance | h7 | |
| Feed f in steel < 1100 N/mm2 | 0.08 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122250 4,5 | |
| EAN / GTIN | 4045197041609 | |
| Manufacturer number | 122250 4,5 |
Application Table
N
200
N
140
N
140
P
70
P
70
P
60
P
40
P
25
M
20
M
20
S
15
N
140
Description
Version:
Similar to DIN 338.
Nominal ⌀ and shank ⌀ equal.
Nominal ⌀ and shank ⌀ equal.
Note:
Flute length LC = L2 + 1.5 × DC.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide jobber drill, uncoated, ⌀ DC h7: 4,5mm
on request
In stock
268 pieces in stock
US $ 26.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
115 pieces in stock
US $ 31.69
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
208 pieces in stock
US $ 35.25
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Through-coolant | no | no | no |
| Standard | DIN 338 | DIN 338 | DIN 338 |
| Shank tolerance | h7 | h7 | h7 |
| Tool material | Solid carbide | Solid carbide | solid carbide |
| Helix angle | 30 degrees | 30 degrees | 30 degrees |
| Feed f in steel < 1100 N/mm2 | 0.08 mm/rev. | 0.08 mm/rev. | 0.08 mm/rev. |