Vrták do plného KOMET KUB Pentron® s vymeniteľnými doštičkami Valcová stopka, 2×D, ⌀ D_C: 29,4mm

Č. pol.: 236614 29,4

Individual prices for business customers after

⌀ D_c (mm):

Počet

na vyžiadanie

Dodanie za 3 – 4 týždňov

0 kus/y s okamžitým dodaním

Drill depth for indexable insert drill up to: 2×D
Shank: ISO 9766
Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant: yes
Machining strategy: HPC

Podrobnosti o výrobku

Series		KUB Pentron®
Nominal ⌀ D		29.4
Drill depth for indexable insert drill up to		2×D
Shank		ISO 9766
Use for drilling		limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant		yes
Machining strategy		HPC
Reach L₁		60 mm
Overhang L_A		83 mm
Shank ⌀ D_s		32 mm
Shank length L_s		60 mm
ISO code indexable insert		SOGX 09T308 28-...
Pack of insert screws		239652 8IP6 (2.2 Nm)
Number of cutting edges Z		1
Type of product		Indexable drill

Bore tolerance: ⌀D − 0.1 / + 0.2

Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
Best dimensional accuracy under very difficult drilling conditions.
Stock costs reduced because internal and external inserts are identical.
Offset-axis drilling is possible up to V_max = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.

With indexable inserts No. 236605 − 236610.

Clamp screws (without indexable inserts).

Version 2×D and 3×D with ABS^® also available on request in imperial sizes.
Version with PSC shank available on request.